this goes to the male end thats kinda under the fuel rail, but this plug doesnt fit, can i splice it with anotherone that fits
this is where it goes


these two plugs are comming off the same wire as the alt, but the alt is wired up.

[/img] is do i need to splice one of the plugs from the previous pic into this one

Did you have 2 harness's to make one? or did you yank the harness with the SOHC, or was it purchased at two different times from different motors.

I don't really understand how that can't fit on there... And how the alt is already hooked up. I'm confuzzled

Looks to me like what you've got there is part of your lower harness, one (the last pic). The smaller plug is likely the excitation wire for the starter solenoid, and the larger plug is likely for one of your transmissions sensors. As for the first plug & it's home, it looks like it could very well be the IAC shutter valve.

I would recommend a second opinion on this though.

-Dan

sorry guys let me clarify.
yes its the s12 loer harness. mine splits into a "Y" where one side is where the plugs for the alternator were and the other side is what i too a pic of. i was wondering where the other side went to.

on the ka harness where i was asking about splicing, well i just cant get the female end to go on the male end, or in otherwards pic one wont slide onto pic to, it seems like thats wehre that plug goes as there is nothing else around it.