Finally got most everything done bled the clutch today figured out the throttle cable and shes running! Not running well but running. I have no exhaust yet so i cant really tell what the problem is. It idles perfect but wont rev up with out hesitation, could be anything i guess vacum leak somewhere maybe. Cant wait till its running perfect, might take me some time to get it running smooth though.

Craig

did you check the timing yet.. thats what it sounds to me is wrong.sr are very tempermental about timing

Thats what i was thinking but after some thinking i figured it out. The simplest thing always get you the MAF was only half pluggd in but looked plugged in!!

So exhaust and im ready to go.
WOOOT

I was going to say that they do that with no AFM plugged in. Timing doesn't make my SR run like crap, just effects the power.
Good to see you got it going w00t w00t.

what did you do to make the throttle work?

5 year old topic

matt will know...

What exactly is wrong with the throttle?
Gotta be a little more specific than "it doesn't work"... S13 and S14 are a little different, but it should be somewhat like the KA.

Not really sure what to do if the cable isn't long enough, I suppose you might be able to use a 240SX's cable, they have a similar setup at the pedal.